Backward (Slash Command): Difference between revisions

Latest revision as of 15:53, 28 December 2022

/backward

Move backward.

The command behaves differently depending on the option that is used:

Option	Behavior
+	Activates the command while the key or button is pressed, deactivates when the key or button is released.
++	Toggles the command on and off with each press of the key or button.
1	Activates the command indefinitely, until it is disabled.
0	Disables the command.

The "+" and "++" options are prefixes that must be placed at the beginning of the command. These options are intended to be used with commands that are bound to keys or mouse buttons.
The "1" and "0" options must be placed after the command separated by a space or comma.
By default, this command is bound to the S key as +backward.

/backward 1
/+backward

@@ Line 2: / Line 2: @@
 {{SlashCommandArticle|command=backward|note=Move backward.}}
-== Example ==
-; /+backward
+{{Movement Options}}
-: persists while a key is held down and cancels when released.
+* By default, this command is bound to the S key as <code>+backward</code>.
-; /++backward
-: persists until this command is given again.
+==Examples==
-; /backward 1
+ /backward 1
-: persists until /backward 0, /+backward, or /++backward is given.
+ /+backward
-; /backward 0
-: stops any other backwards movement
-== Related ==
+{{Navbox Movement}}
-{{Movement Commands NavBox}}
 [[Category:Movement Commands]]
+[[Category:Slash Commands]]